iterative program
英 [ˈɪtərətɪv ˈprəʊɡræm]
美 [ˈɪtəˌreɪtɪv ˈproʊɡræm]
网络 迭代程序
双语例句
- Iterative development& setting the initial program milestones and planning a set of program deliverables that incrementally culminate in the delivered solution
迭代开发&设置初始的规划里程碑，并计划一组增量地达到所交付解决方案的规划交付产物 - Consequently, you must treat the introduction of iterative development as a project or program and give it the appropriate support.
因此，你必须把引入迭代开发做为一个项目进行，并给予适当的支持。 - Proper iterative program management dictates that the practitioners doing the work should be the ones deciding how much they can accomplish in a given amount of time.
适当的迭代项目管理说明从业者从事的工作应当是决定他们在给定量的时间里能完成多少。 - A new iterative FFT algorithm is proposed to solve the contradiction between the program code size and the processing speed encountered in applications based on the dedicated TMS320LF2407A.
针对在TMS320LF2407A上直接实现快速傅利叶变换中遇到的处理速度和程序量之间的矛盾，提出一种重复算法。 - Then the application conditions and iterative formula and its numerical solution are discussed. A calculation program is compiled and a practical example is calculated.
简单说明了牛顿法的适用条件和迭代公式，编制了计算程序，给出计算实例。 - With the alternate iterative method, the dynamic phasor model can be interfaced with the transient stability program easily.
通过交替迭代法实现了动态相量模型和暂态稳定程序的接口，并且在进行交替迭代时，两种模型可以选用不同的仿真步长。 - Aimed at some limitation of the traditional BP Neural Network, a global optimal algorithm is put forward based on alternative and iterative algorithm, and the corresponding program of FORTRAN is developed.
针对经典算法BP网络存在的一些缺陷，提出了一种交替迭代算法神经网络，并用FORTRAN语言编制了该程序。 - RESULTS The iterative steps of EM algorithm were given, and a proper program was implemented in SAS/ IML code.
结果给出了EM算法的迭代步骤，并用软件SAS/IML编程实现。 - Newton-Raphson search technique is a nonlinear discrete dynamic system, the optimum model to find Julia set point of Newton-Raphson iterative function is proposed and it's solved by evolutionary program-ming.
牛顿-拉夫森（Newton-Raphson，NR）搜索技术是一种非线性的离散动力系统。 - The design and application of iterative interpretation program of electrical sounding
电测深叠代解释程序设计及其应用 - In this patter, a mixed formulation for finite element contact analysis combined with Newton-Raphson iterative procedure, axe used to solve this kind of problem and the Fortran program for this procedure is also listed.
本文采用有限元混合法及Newton-Raphson迭代求解。 - This paper puts forward a numerical model, a parallel operator splitting-up implicit iterative scheme, parallel arithmetic program, parallel arithmetic information and alternating-direction mesh subdivision.
从生产实际出发，提出数学模型，构造大规模精细并行计算的耦合算子分裂隐式迭代格式，设计了并行计算程序和并行计算的信息传递和交替方向网格剖分方法。 - According to the formula for converting decay count into counting rate of the initial point in the measuring interval, an iterative method and a program for analysing multi-component decay curves with correction for decay during the counting interval have been designed.
根据放射性核素在测量区间中的测量计数与该区间始点处的放射性活度的转换公式，提出了一个在测量区间中考虑衰变校正计算的迭代方法和多组分衰变曲线分析程序。 - The improved iterative least squares method and program for calculating balancing correction masses in rotating machinery
旋转机械动平衡校正质量的最小二乘迭代计算方法及其计算程序 - A pointed type implicit surface drawing algorithm with iterative function is provided to solve the default and its implementation is very simple and it is easy to program.
为了解决此缺点，提出了一种使用迭代函数系统的点式隐式曲面绘制算法，它的实现非常简单，易于编程。 - Some problems like equations simplified, choosing initial valve of iterative function, convergency of iterative function and the flow chart for computer program have been discussed.
讨论了方程组的化简、迭代函数的初值选择、迭代函数及其收敛性以及计算机程序编制流程图。 - Experimental result shows that the iterative efficient and program complexity of the algorithm is obvious over the method using Fourier-Mellin or Clustering+ LMS algorithm.
实验结果表明，在迭代性能与程序复杂性方面均优于Fourier-Mellin算法和聚类法+LMS（最小二乘估计）算法。 - This paper also gives a mathematical model for the evaluation of propagation constant v, obtained by Newton iterative method, for program design of computer software.
同时给出了用牛顿迭代法求解介质波导中传播常数的计算机软件设计的数学模型。 - Vector equations of the tooth bearing and transition curved surface at dedendum are derived for Gleason spiral bevel gears by SGM and solved by Newton's iterative method with relevant computer program provided so as to implement the curve emulation of tooth shape.
针对用SGM法加工的弧齿锥齿轮，用矢量法推导了工作齿面和齿根过渡曲面的矢量方程，用牛顿迭代法求解。 - Medium filtering, linear transformation, iterative and other algorithms are used in this part. The processing program are compiled in Visual C++.
应用了图像灰度化，中值滤波，线性变换，阈值二值化，串行迭代细化等算法，用Visualc++作为开发工具，实现了对跟踪曲线的提取。 - In this paper, the formulas of neutral axis and internal force for the elastic supported continuous beam and frame are derived by using the phased integration method, and an iterative program for nonlinear internal force is developed, an example is calculated and analyzed.
用分段积分法推导出不同模量弹性支承连续梁及框架的中性轴公式和内力计算表达式并编制非线性内力计算迭代程序。 - In this paper, Newton iterative formula based on deviations of dropping point is deduced and the iterative program is designed, an example is given.
推导了根据落点偏差求飞行程序角和发射方位角的牛顿迭代公式，设计了迭代算法，并给出了实际算例。 - APPLICATION OF ITERATIVE CALCULATION IN WATERPOWER CALCULATION Hydraulic Calculating Program on the Stilling Basin of Baffle Wall Style
迭代法在水力计算中的应用消力坎式消力池的水力计算程序 - For the options unknown address of the logistics park location model, the paper uses iterative algorithm to solve the problem. It compiles the C++ program to achieve the algorithm, and uses examples to demonstrate the feasibility of the algorithm.
对于未知备选地址的物流园区选址模型，本文利用重心迭代算法进行求解，编写了C++程序实现了该算法，并通过实例验证了算法的可行性。 - The weighting coefficients of the adaptive filter can be constantly updated through iterative using adaptive iterative program. It can enhance the control precision and stability.
其自适应滤波器的权系数可以通过自适应迭代程序不断迭代更新，从而可以提高控制精度和稳定性，因而可以得到广泛的应用。 - With the model, we can expedite convergent speed of iterative operation and reduce modeling and program workload of large polymer injection system. 4.
该模型的建立，加快了迭代算法的收敛速度，节约了大型注聚系统建模编程工作量。 - On the basic of exhaustive study and derivation of the basic ideas, algorithms and calculation formula of the Gauss-Newton least squares method, the iterative calculation program based on Gauss-Newton least square method was complied using VC++ language. The best fitting parameter values were obtained.
在详细研究和分析高斯-牛顿最小二乘法的基本思想、算法和计算公式的基础上，应用VC++语言编写了高斯-牛顿最小二乘法迭代计算程序，得到了最佳拟合参数值。 - The objective function of the model is piecewise continuous function. The model was solved by the iterative linear program.
模型的目标函数为分段线性函数，文章采用迭代线性规划对模型进行了求解。 - In addition, in order to solve the model, it also provides the detailed description of two algorithms, iterative way and approximate search way, which are implemented by Visual C++ program.
然后给出了解决竞争性选址问题的迭代算法和近似搜索法详细过程，并通过Visualc++将算法实现。